Old Town is one of the Anacortes neighborhoods we dispatch to out of our Bellevue yard, covering 98221 in Skagit County. Below is what we actually find in the housing here, what happens in the thirty minutes after you call, and how a loss gets dried, documented and paid for.
- Neighborhood
- Old Town
- ZIP codes served
- 98221
- Dispatched from
- Bellevue yard · Skagit County
- On-site response
- 30 minutes or less, 24/7
What goes wrong in Old Town homes
The housing stock in Old Town
Homes in Old Town sit in 98221, and much of that plumbing has been asked to do thirty more years than it was designed for. The stock runs to early-1900s old town homes, mid-century view homes and waterfront condos. The calls we take from Old Town most often start with wind-driven rain intrusion or aging galvanized plumbing, and by the time someone dials, the water has usually been sitting long enough to reach the insulation.
Early-1900s homes, original plumbing. That one detail explains most of what we find in 98221 zip code. Water follows a joist bay or a conduit chase, so a supply line that lets go in a second-floor bath can surface as a soft spot in a kitchen ceiling two rooms over. The stain you can see is the last thing to appear and the first thing to get photographed; the moisture map is what tells us where the water actually went.
The first 30 minutes in Old Town
From your call to your curb
A dispatcher answers on the second ring, takes the address in Old Town, and asks the three questions that change the response: what is wet, whether it is still running, and whether the power is safe. A stocked crew starts rolling before the call ends. Old Town sits inside our normal Anacortes route, which means the crew that arrives has already been in your ZIP code this month. You get the technician name and an arrival window by text, and we hold to 30 minutes or less — if we run past it, the emergency response is free.
On arrival the crew does four things before a machine comes off the truck: confirms the source is shut off, photographs the cause of loss, sets containment if the water is contaminated, and takes baseline moisture and thermal readings on every affected surface. Only then does extraction start. That order matters, because it means the scope is measured rather than guessed at, and the first photos in your claim are the ones an adjuster will actually trust.
Drying, cleaning and documenting a Old Town loss
Drying is a schedule, not a guess
Extraction clears the standing water in an afternoon; drying takes days. Air movers keep air moving across wet surfaces, dehumidifiers pull that moisture back out of the air, and the two run on a schedule set by readings rather than by the calendar. A crew returns every day to log moisture content at the same points until the structure meets the dry standard — usually three to five days for a contained loss, longer when a Anacortes home has been wet for a week before anyone called.
Every day of drying produces a record: photos, a moisture map, thermal images, equipment placement logs and a daily reading sheet. At the end you get an itemised Xactimate estimate in the format adjusters already read, and we bill the carrier directly so you are not fronting a five-figure job on a credit card. 99.9% of the claims we write are approved, and on qualifying full-service jobs we cover the deductible. You should not be learning insurance terminology while your floors are wet.
What gets saved and what gets replaced
Not every wet item is a total loss, and not every dry one is safe. Carpet and pad that took clean water can usually be dried in place; that same carpet under a sewage backup is bagged and carried out the same day. Hardwood can sometimes be saved with mat drying, and drywall that has wicked water above the baseboard gets cut to the flood line, because the insulation behind it will not dry and will grow mold inside a week. The lead explains the difference in your own rooms before anything is removed, and every packed-out item is photographed and inventoried so nothing comes back missing.
Why Old Town homeowners call SeaTacRestore
Local, licensed and accountable
We are a Bellevue company operating under WA Contractor #SEATARS812KD, an IICRC Certified Firm · WRT · ASD · AMRT · FSRT firm carrying $2M liability coverage on every job. We have dried, cleaned and rebuilt houses across Anacortes, and the Old Town jobs follow the same pattern often enough to plan for it. We hold 4.9 stars across 1284 reviews, and have dried, cleaned and rebuilt more than 12,000 Puget Sound homes since 2009. None of that is decoration — it is why we can promise a 30-minute response in Old Town without subcontracting the work to whoever happens to be closest.
Emergency mitigation, mold remediation, contents handling and the rebuild sit in one scope under one license and one project manager, so nothing falls into the gap between two contractors. We work with 40+ carriers, we will read your policy with you rather than at you, and the inspection is free with no obligation. If you are standing in water in Old Town right now, the number is 425 390 5911 — a person answers, every hour of every day.

Straight answers for Old Town
How fast can SeaTacRestore reach Old Town?
Our yard is in Bellevue and Old Town sits inside our normal Skagit County route, so a stocked crew is on site in 30 minutes or less, day or night. If we arrive past 30 minutes, the emergency response is free.
Do you work with my insurance company in Old Town?
Yes. We work with 40+ carriers, bill them directly, and hand over a documentation package built to the standard adjusters use: photos, thermal imaging, moisture maps, daily drying logs and an itemised Xactimate estimate. 99.9% of the claims we write are approved.
What should I do before the crew arrives in Old Town?
Shut the water off at the main, kill power to any room with water near outlets, photograph everything before you move it, and lift furniture onto blocks. Do not run a household fan or shop vacuum on sewage, and do not bleach mold — both make the loss bigger.
Ready to move? Request service online or call 425 390 5911 and speak to a Puget Sound dispatcher now.





































